Set it and forget it

Mount it once.
Forget it.

The Super Node is a solar-powered, IP65-sealed mesh relay designed to live on a rooftop or pole and extend your neighborhood's coverage indefinitely — no power bill, no maintenance visits.

Get the Super Node → Read the Guide
NS-300 CLIENT CLIENT IP65
Works for
Rooftop relay
HOA / neighborhood infrastructure
Park or trailhead anchor
Ridgeline repeater

Infrastructure that
never goes down.

A single Super Node on an elevated rooftop can cover a 1–3 km radius in a suburban neighborhood. Pair a few together and you have a neighborhood backbone.

Recommended
NS-300 · Super Node
Best for Rooftop Relay · NS-300
Super Node

Solar-powered. LiFePO4 battery. IP65 sealed. Pole-mountable. The Super Node is engineered to run for months without intervention on a south-facing roof.

  • LilyGO T-Beam Supreme — SX1262 + GPS, 915 MHz
  • 5 dBi fiberglass antenna — external mount, maximum range
  • LiFePO4 18650 — 2,000+ charge cycles, no thermal runaway
  • 10W solar panel + MPPT controller — runs indefinitely in SoCal sun
  • IP65 ABS enclosure — dust-tight, water jet rated
  • Pole mount hardware included · Cable glands sealed
$249 free US shipping
Order Super Node →

Pre-flashed · Ships 3–5 days · Made to order

Power math

The T-Beam Supreme in router mode draws roughly 80–120mW at idle. A 10W panel in Southern California delivers a large daily surplus. The LiFePO4 battery stores 3–4 days of reserve. The Super Node will run indefinitely through normal cloudy periods without any intervention.

Up in an afternoon.

One mounting session. Then it runs itself.

Step 1
Mount and aim the panel
Mount the IP65 enclosure on any 1–2" pole or wall bracket. Aim the 10W solar panel south at 25–35° tilt. Seal all cable entry points with the included glands.
Step 2
Connect the antenna
Route the 5 dBi fiberglass antenna to the external SMA bulkhead. Wrap the connector with the included self-amalgamating tape.
Step 3
Power on and verify
The node powers up automatically when the battery is charged. Check position via the Meshtastic app from any nearby device. No further configuration needed.

Parts & substitution notice: Node Star products are hand-assembled to order. While we maintain standard bills of materials, component availability may vary. We reserve the right to substitute functionally equivalent parts — same chipset family, equal or greater specification — when sourcing conditions require it. Substitutions will never reduce core functionality. Customers will be notified of any significant changes prior to shipment.