Hand-assembled in the US · Ships in 3–7 days

Built for your situation.

Every node ships pre-flashed and ready to mesh. Pick your use case and we'll point you to the right hardware.

What are you building for?

🏠
Home & Neighborhood
Always-on relay for your block. Plug into any outlet.
NS-100 🏔️
Trail & Camping
GPS comms off-grid. No cell, no problem.
NS-200 🔴
CERT & EmComm
Deploy-ready field kit for response teams.
NS-200 📡
Rooftop Relay
Set it and forget it. Solar, sealed, unattended.
NS-300 ⚡
Disaster Prep
Maximum autonomy. Works when nothing else does.
NS-300

Three nodes.
Every situation covered.

All nodes ship pre-flashed with Meshtastic, configured for your use case.

NS-100
🏠 Home 🏘️ Neighborhood 🏢 Office
↑ Why this for home & neighborhood

The NS-100 is plug-and-play — power it from any USB outlet and it immediately starts relaying for your block. No weatherproofing needed. No battery to manage. Just a quiet, always-on node that makes your neighborhood mesh denser.

Full details for home & neighborhood →
Tier 1 · NS-100
Home Node

Plug it into any outlet. Your house becomes a mesh relay in under a minute.

  • Heltec LoRa32 v3 — SX1262 chip, 915 MHz
  • 3 dBi stub antenna — pre-attached SMA
  • ABS desk enclosure — compact, indoor-ready
  • USB-C powered · Meshtastic pre-flashed
$99 free US shipping
Order Home Node →

Ships within 3–5 business days · Made to order

Top of Line
NS-300
📡 Rooftop ⚡ Grid-Down ☀️ Solar 🏕️ Overlanding
↑ Why this for rooftop relay

The NS-300 is designed to be forgotten about. IP65 sealed, solar-charged, LiFePO4 battery — it runs indefinitely on a south-facing roof with no maintenance. Mount it once, and it quietly extends your neighborhood mesh for months.

Full details for rooftop relay →
↑ Why this for disaster prep

When the grid goes down, the NS-300 keeps going. Solar + LiFePO4 + IP65 enclosure means it operates autonomously through extended outages. Pre-position one at home and one at your meetup point. Your mesh is up before cell towers even know they're down.

Full details for disaster prep →
Tier 3 · NS-300
Super Node

Solar-powered. Weatherproof. Runs for months with zero intervention.

  • LilyGO T-Beam Supreme — SX1262 + GPS, 915 MHz
  • 5 dBi fiberglass antenna — external mount, SMA
  • LiFePO4 18650 + MPPT controller — solar charging
  • IP65 ABS weatherproof enclosure — pole-mountable
  • 10W solar panel + pole mount hardware included
$249 free US shipping
Order Super Node →

Ships within 5–7 business days · Made to order

Every node includes
⚡
Pre-flashed firmware
Meshtastic installed and configured. No software setup required.
📋
Quick-start card
Channel keys, app setup, and your first mesh connection in 5 minutes.
🔌
Power cable
USB-C for the Home Node. Field Nodes and Super Nodes include solar or battery.
🛠️
30-day support
Something not right? We'll make it right. Email support included.

Common questions

I need one for camping and one for home. Do I need two different nodes?
Yes — the Home Node (NS-100) is designed to stay plugged in at your house as a permanent relay, while the Field Node (NS-200) runs on battery and goes in your pack. They work together on the same mesh channel automatically.
Do I need to configure anything when it arrives?
No. Every node ships pre-flashed and pre-configured with a default channel. The quick-start card walks you through installing the Meshtastic app and connecting in under five minutes. No command line, no firmware flashing.
Can I order in bulk for a CERT team?
Yes — for groups of 5 or more, get in touch and we'll configure all devices to the same channel, provide a group discount, and include a reference card for every team member.
Does the Super Node really need no maintenance?
In good sun (Southern California conditions), yes. A 10W panel with a LiFePO4 battery provides enough buffer for extended cloudy periods. The LiFePO4 chemistry is rated for 2,000+ charge cycles — that's years of daily solar cycling with no cell replacement needed.
Can I get a node pre-configured for a specific channel and region?
Yes. Add a note at checkout with your desired channel name, pre-shared key, and frequency region (US 915 MHz is default). All nodes in a group order are configured identically.